Railroad Grade Crossing
INT-RGC-15 Railroad Grade Crossing
Typical at: Undeveloped Rural Suburban
Compact, Urban, and Core are also possible wherever an active rail line crosses a public street. The pattern is most common near industrial or agricultural rail spurs, but it is not exclusive to them.
#Design notes
This is its own pattern, not a row on another page, because it has its own geometry standard, its own required warning devices (distinct from any road-only intersection control), and its own sight-distance rules that vary by railroad company. It also applies across street types, not just Industrial Collector (COL-IND-03) or Rural Collector / Farm-to-Market Road (COL-FTM-02), where an active spur is a realistic condition.
The core hazard is a "humped" or high-profile crossing that can strand a low-ground-clearance or long-wheelbase vehicle on the tracks. This is a distinct failure mode from any other intersection risk in this guidebook.12
- Approach grade. The maximum approach grade should not exceed 3 inches of rail elevation at a point 30 ft from the center of the nearest rail, on both sides.3
- Warning device. Where an existing humped crossing cannot be corrected, the MUTCD W10-5 Low Ground Clearance sign, with its W10-5P plaque, is the required warning device.3
- Sight lines. Required sight-line distances vary by the specific railroad company operating the line, not a single national number.3
- Storage and queuing. A crossing located near a highway intersection carries a higher collision rate in part because of the short vehicle storage area between the crossing and the intersection. Queues can form across the crossing itself.4
- Pedestrians. Pedestrian-specific treatments are a separate design discipline from vehicle treatments: inter-track fencing, pedestrian gates, swing gates, channelization, and detectable warning surfaces.5
#Related patterns
Industrial Collector (COL-IND-03) (an active rail spur is a realistic condition on industrial land), Rural Collector / Farm-to-Market Road (COL-FTM-02) (rail spurs are plausible in agricultural contexts), Signal (INT-SIG-03) (a nearby signalized intersection is the storage and queuing interaction described above)
#References
- Legal / regulatory Federal Highway Administration and Federal Railroad Administration, Highway-Rail Crossing Handbook, Third Edition.(opens in new tab)
- Evidence-based Eck, R.W. and Kang, S.K., "Low-Clearance Vehicles at Rail-Highway Grade Crossings: An Overview of the Problem and Potential Solutions," Transportation Research Record 1327 (1991), pp. 27 to 35.(opens in new tab)
- Legal / regulatory Florida Department of Transportation, FDOT Design Manual, Topic #625-000-002, Section 220 "Railroads" (humped crossing definition and MUTCD W10-5 sign requirement).(opens in new tab)
- Legal / regulatory Federal Highway Administration, Highway-Rail Crossing Handbook, Appendix B, "Components of a Highway-Rail Grade Crossing."(opens in new tab)
- Legal / regulatory Federal Railroad Administration, "Engineering Design for Pedestrian Safety at Highway-Rail Grade Crossings."(opens in new tab)